Shop MIC-TZD Vibration & Temperature Monitoring Transmitter From Factory

MIC-TZD Vibration and temperature monitoring transmitter Manual

MIC-TZD integrative vibration and temperature transmitter, integrating the traditional vibration and temperature sensor and the accuracy measuring circuit together, not only achieve “sensor + transmitter” mode vibration measurement system function, but also achieve economic but high accuracy vibration measure system. The transmitter can connect directly with PLC, DCS or other systems. Mounted on the bearing cover of rotating machines, the transmitter is an ideal choice for steam turbine, compressors, motors, blower, fans, water pump etc to measure vibration speed or vibration amplitude. Because its output signals are caused by moving coils cutting magnetic force line, so its power supply can be 24VDC, easy installation and maintenance. The transmitter can be used widely in heating and power plant, cement plant, machine plant, blower plant, paper made plant, coal mine machine etc.

Huge range Short thermal response time, reducing dynamic error High mechanical strength, slightness, fast thermal response, good shock and pressure resistance;Thermal resistance measure the temperature by its characteristics: its resistance also changes when the measured object temperature changes. When the resistance changes the working instrument will show the temperature value corresponding to resistance value.

Sensitivity	20mv/mm/s±0.3% 30mv/mm/s±0.3% 50mv/mm/s±0.3%
Frequency Response	10-1000Hz
Measuring Range	0-10mm/s 0-20mm/s 0-30.0mm/s 0-40.0mm/s 0-50.0mm/s 0-100um 0-200um 0-300um 0-500um 0-1000um
T	0-200℃
Signal Output	standard current 4-20mA (default when order) or
Output Impedance	≤500
Power supply	DC24V
Max acceleration	10g
Measurement Direction	vertical or horizontal
Mounting method	vertical or horizontal mounted on the measured vibrating point
Mounting thread	Leechs / Thread（M8X1.0）
Ambient Temperature	-40℃ to 85℃,
Relative humidity	≤90%
Size	φ39×82mm,
Weight	About 400g

Remark：This product has anti-inversion function inside, so there is no positive or negative difference between the lead wire, that is, +24V to connect one line at will, 4-20mA to connect another line.

MIC-TZD Selection of Piezoelectric Integrated Vibration and temperature Transmitter

MIC-TZD-□-C□□-T□□-D□□-D□□-F□□

TZD Type	C measuring range	T temperature	D Thread	E Wire length	F Output
B(Non explosion-proof） F (explosion-proof）	V:01: 0~10mm/s 02: 0~20mm/s 03: 0~30mm/s ......... D: 01: 0~100um 02: 0~200um 03: 0~300um ........	T:01:0-100℃ 02:0-200℃ ……	11: M81.2512: M101.0 13: M5*0.8 14: 1/4~28 15: Leechs 16：Customize	01: 1m02: 2m 03: 3m .............	4:4-20mA (default)S：RS485

MIC-TZD Vibration and temperature monitoring transmitter Manual

Products Details

Featured Products

Contact us