| Accuracy | T:±0.3℃ (Full range in average); | Power Supply | 15-36VDC (4-20mAOutput); |
| RH: 3%RH (including non-linear, repeatability, hysteresis) | 12-36VDC(0-5VDC, 0-10VDC; RS485 Output) | ||
| Long Stability | T: ＜0.04℃/year; | Power consumption | 60mA |
| RH: ＜0.05%RH/year | Housing Material | ABS | |
| Range | T: -20 to 80℃; 0 to 50℃, , -40 to 60℃; | Probe Type | Dust-proof (standard); water-proof |
| RH:0-99.9% | Installation | Duct Type | |
| Resolution | T: 0.1℃, RH:0.1%RH | Case Size | 80mmx65mmx38mm (LXD); |
| Response time | T: 6t(63%): min=5s,max=30s; | Probe Size | 230mmx 14mm (LXD) |
| H (90% static air): 8second | Terminals Size | 1X2.5 mm² or 2X1.5 mm² | |
| Load resistor | ＜500ohm | Entry connector | M16X1.5mm |
| Output | 4-20ma, 0-5VDC, 0-10VDC; RS485 output | Protection | Electrical Case: IP65; Probe: IP54 |
| RS485Protocol | Standard MODBUS-RTU protocol | Working Ambient | T:-40 to 80℃, H:0-99.9%,no dew |
| Baud rate | 9600; customized | Storage Temperature | 10-50℃ (0-125℃ atpeak) |
| Accuracy | T:±0.3℃ (Full range in average); | Power Supply | 15-36VDC (4-20mAOutput); |
| RH: 3%RH (including non-linear, repeatability, hysteresis) | 12-36VDC(0-5VDC, 0-10VDC; RS485 Output) | ||
| Long Stability | T: ＜0.04℃/year; | Power consumption | 60mA |
| RH: ＜0.05%RH/year | Housing Material | ABS | |
| Range | T: -20 to 80℃; 0 to 50℃, , -40 to 60℃; | Probe Type | Dust-proof (standard); water-proof |
| RH:0-99.9% | Installation | Duct Type | |
| Resolution | T: 0.1℃, RH:0.1%RH | Case Size | 80mmx65mmx38mm (LXD); |
| Response time | T: 6t(63%): min=5s,max=30s; | Probe Size | 230mmx 14mm (LXD) |
| H (90% static air): 8second | Terminals Size | 1X2.5 mm² or 2X1.5 mm² | |
| Load resistor | ＜500ohm | Entry connector | M16X1.5mm |
| Output | 4-20ma, 0-5VDC, 0-10VDC; RS485 output | Protection | Electrical Case: IP65; Probe: IP54 |
| RS485Protocol | Standard MODBUS-RTU protocol | Working Ambient | T:-40 to 80℃, H:0-99.9%,no dew |
| Baud rate | 9600; customized | Storage Temperature | 10-50℃ (0-125℃ atpeak) |
| KHT200 temperature and humidity sensor | ||||
| Order Code: KHT200-NAN | Description | |||
| KHT200 | -X | X | X | KHT200 Duct Type temperature and humidity sensor |
| Indicator | -N | None | ||
| -D | Yes, with indicator | |||
| Output Type | A | 4-20mA | ||
| A2 | 4-20mA (2 wire, special), when temperature measured, humidity should be measured | |||
| V | 0-5VDC | |||
| V2 | 0-10VDC | |||
| R | RS485 output | |||
| Probe Type | N | Standard type, dust-proof | ||
| W | Water-proof (special) | |||