• High Accuracy, High Stability; Anti-Interference dealing on PCB • High sealing technology and excellent three-proof coating protection • Range: T: -20 to 80°C, 0-50°C, -40 to 60°C; H: 0-100% • Temperature range can be set by inner DIN switch • With offset function by built-in keys • Output: 4-20mA,0-5VDC,0-10VDC, RS485 output • Probe can be with dust-proof, water-proof type, optional • Accuracy: T:±3°C, H:±3%; Resolution: T:0.01, H:0.1%RH • Protection: Electrical housing: IIP65; Probe: IP54 • Wide power supply: 12-36VDC; 15-36VDC (4-20mA only)

Accuracy	T:±0.3℃ (Full range in average);	Power Supply	15-36VDC (4-20mAOutput);
	RH: 3%RH (including non-linear, repeatability, hysteresis)		12-36VDC(0-5VDC, 0-10VDC; RS485 Output)
Long Stability	T: ＜0.04℃/year;	Power consumption	60mA
	RH: ＜0.05%RH/year	Housing Material	ABS
Range	T: -20 to 80℃; 0 to 50℃, , -40 to 60℃;	Probe Type	Dust-proof (standard); water-proof
	RH:0-99.9%	Installation	Wall Type
Resolution	T: 0.1℃, RH:0.1%RH	Case Size	80mmx65mmx38mm (LXD)
Response time	T: 6t(63%): min=5s,max=30s;	Probe Size	42mmx 16mm (LXD)
	H (90% static air): 8second	Terminals Size	1×2.5 mm² or 2×1.5 mm²
Load resistor	＜500ohm	Entry connector	M16x1.5mm
Output	4-20ma, 0-5VDC, 0-10VDC; RS485 output	Protection	Electrical Case: IP65; Probe: IP54
RS485Protocol	Standard MODBUS-RTU protocol	Working Ambient	T:-40 to 80℃, H:0-99.9%,no dew
Baud rate	9600; customized	Storage Temperature	10-50℃ (0-125℃ atpeak)

KHT100 temperature and humidity sensor
Order Code: KHT100-NAN				Description
KHT100	-X	X	X	KHT100 Wall Type temperature and humidity sensor
Indicator	-N			None
	-D			Yes, with indicator
Output Type		A		4-20mA (standard)
		A2		4-20mA (2 wire, special), when temperature measured, humidity should be measured
		V		0-5VDC
		V2		0-10VDC
		R		RS485 output
Probe Type			N	Standard type, dust-proof
			W	Water-proof (special)